Vittorazi Moster 185 Plus Manual Start *MY20*
MY19 Moster 185 Plus. The smallest and most powerful engine in its category. This is the Newest Moster available!!! New Airbox, Carb, and 4 Spring Exhaust.
Please Note: Does not come with prop, prop spacer, or prop bolts due to the many different options available. Please see links to these options below.
With the latest addition to the Moster range, Vittorazi introduces a further innovation and offers the best value for weight, power, thrust, comfort, quietness and reliability available on the market. The main added value of this new version is given by the clutch. This integrated device significantly reduces vibrations at idle speed and it increases safety during pre-flight routine (propeller at rest). The vibrations are almost imperceptible at all engine speeds, while the weight distribution and the size of the engine minimize the torque effect. The other notable improvement has been achieved with the introduction of the new exhaust system, extremely quiet and performing at the same time. The entire engine has been designed to obtain the minimum noise emission, which is attenuated by the air box, the transmission belt, a special "Db-killer" silencer, and the choice of the best propellers. The "soft starter system" (3S) is one of the new advantages. It is a manual start system that allows the engine to start, both in flight and on the ground, with a single pull through the use of only one hand. The Moster185 plus structure is basic and simple and it has a compact design (ideal and easy for control operations and maintenance). The total weight of the engine is 14.2 kg in the manual start version. The "plug & play" installation of the engine is quick and easy. The cooling of the thermal group is secured by propellers with dedicated profiles and exclusively designed for the Moster. The compatibility of these propellers is guaranteed for the Classic, Silent or Plus versions. Vittorazi has also developed, for use in hot climates or other specific uses of the engine, such tandem or competition, a special cylinder head covering designed for this engine. This allows to significantly increase the cooling, reducing the operating temperature. The engine develops a maximum power of 25HP at 7,800 RPM. Vittorazi agrees to communicate the values of power, weight and static thrust in accordance with the actual values measured. The thrust is smooth and linear up to 75 kg with a 130 cm propeller (70 kg with a 122 cm propeller). The fuel consumption of this engine, significantly reduced, is about 4.0 liters/hour considering a cruise flight. Thanks to the specific Walbro/Vittorazi diaphragm carburetor, the engine is not affected by bending in preparation for takeoff or during flight, and it maintains a constant idle speed.
Cycle
2 strokes
Stroke
54 mms
Swept volume
184.7 cc
Bore
Ø 66 mms
Power
25 hp at 7.800 rpm
Cylinder
Single cylinder in aluminum Nicasil chromed
Piston
HQ diamond profile, graphite coating, 2 rings chromed
Intake
Silencer air-box - Walbro carburetor - Reed valve intake
Cooling
Extraction from propeller
Starter
Manual pull start - 3S (Soft Starter System)
Clutch
New CNC machined centrifugal clutch
Reduction drive
ratio 1/2.68 - 1/2.87 - PolyV belt.
Ignition coil
Inductive IDI
Spark-plug
NGK BR9ES
Temperatures max
EGT 550° - CHT 250°
Exhaust pipe
Hand-made with carbon "Db-Killer" silencer
Propeller rotation
Anticlockwise
Fuel
Unleaded gasoline - Synthetic oil 2.5 %
Consumption
3.8 - 4.2 liters/hour at 30kg of static thrust, propeller 125cms at 5600 RPM
Weight
14.2 kg pull starter version
Weight
14.6 Kg electric starter version
Weight
15.3 Kg pull & electric starter version